Lithium batteries
11 February, 2003 | Saft Australia Pty Ltd
Saft's 9 V primary (non-rechargeable) lithium batteries are claimed to have twice the capacity of standard alkaline equivalents, doubling the life between battery changes of equipment using the prismatic-format 9 V power source.
Relay replacement
11 February, 2003 | Soanar Plus
International Rectifier has introduced the IRF3000, a 300 V, n-channel HEXFET power MOSFET developed to replace electromechanical relays in telecom and networking applications.
Electronic battery chargers
11 February, 2003 | Power Protection Solutions Pty Ltd
Mastervolt has introduced three battery chargers: the IVO Smart 12/10, 24/6 and 12/15-2. Making use of high frequency switchmode technology the models are ultra compact and lightweight while providing power, correct charging and battery maintenance.
Full range converters
10 February, 2003 | Statronics Power Supplies
When switchmode power supplies were introduced they could handle 110 to 240 V without the need to operate a switch or change a link. The evolving need for power factor correction facilitated 'full range' at high power.
Voltage monitor card
10 February, 2003 | Omnitronics Pty Ltd
The 9902 voltage monitor unit is capable of monitoring a single supply voltage and provides three alarm trip points.
Light screen enclosure
07 January, 2003 | Micromax Pty Ltd
Banner Engineering's heavy-duty floor-mountable enclosures for EZ-SCREEN point and grid model sensors and mirrors are used for guarding areas up to 70 m.
Air/CO analyser
07 January, 2003 | Anri Instruments & Controls Pty Ltd
The model CO12M analyser was developed to meet customers' requirements for reduced and easier maintenance. Equipped with sealed gas cells located in the airtight thermo-regulated measurement module, the CO12M combines a powerful, easy-to-use interface with state-of-the-art components and design technology.
Smart analog sensors
07 January, 2003 | National Instruments Aust Pty Ltd
The Plug & play sensors program, a collaborative effort between NI and leading sensor vendors is aimed at gaining widespread adoption of IEEE P1451.4.
Remote measurement
07 January, 2003 | Endress+Hauser Australia Pty Ltd
Developed specifically to work with existing web browser technology, the Fieldgate FXA 520 gateway is designed for remote process measurement monitoring, diagnosis and configuration of HART-compatible sensors and actuators.
Heat stress monitor
07 January, 2003 | TRE Associates
The RSS 214 DL is a handheld micro processor based wet bulb globe thermometer that measures environmental factors that contribute to heat stress.
VOC sensor
07 January, 2003 | Adilam Technologies
Figaro TGS2620 is a volatile organic compound (VOC) sensor with high sensitivity to alcohol and organic solvent vapours.
Process displays and controllers
06 January, 2003 | Balluff Pty Ltd
The Kubler Codix 500 series process indicators and controllers display information from sensors and analog inputs including current measuring, voltage measuring, millivolts, resistance thermometers and thermocouples.
Thermo-anemometer
06 January, 2003 | Dwyer Omega (Aust) Pty Ltd
The series VT200 Vane Thermo-Anemometer is a multi-functional instrument with the capability to measure air velocity, volume and temperature and is also equipped with a built-in data logger and RS-232 interface. These attributes make it ideal for balancing air conditioning and heating ducts and checking the operation of fans and blowers.
Process indicator
06 January, 2003 | Innovec Controls Pty Ltd
The DI35 is a powered process indicator that accepts a 4-20 mA and 0-10 VDC or PT100 input signal. From this signal the instrument generates a 3.5 digit high intensity LED display of 14 mm digit height with parallel BCD output option.
FT-IR multi-gas CEM
06 January, 2003 | Anri Instruments & Controls Pty Ltd
Environment SA has introduced the MIR FT, a Fourier transform infrared spectroscopy-based multi-gas emission monitoring system.
