Light screen enclosure

Banner Engineering's heavy-duty floor-mountable enclosures for EZ-SCREEN point and grid model sensors and mirrors are used for guarding areas up to 70 m.

These enclosures provide a permanent mounted alternative with additional protection over freestanding floorstands for long-range perimeter and access guarding applications.

The enclosure housings are constructed of impact resistant extruded aluminium with a durable safety yellow powder coat finish.

Twelve different enclosure models are available: five that house the EZ-SCREEN point and grid emitters and receivers, five with corner mirrors that enable perimeter guarding along more than one side of an area using only one light screen emitter and receiver pair, and two with 45° angled mirrors for access guarding applications.

Featuring an anodised aluminium top plate with an integrated circular bubble level, a unique mounting base with three levelling screws, and rotational adjustment capabilities of up to 20°, the system is designed to be set up quickly.

Units with mirrors have three adjusting screws per each mirror, which are independent of the housing to optimise and simplify beam alignment.

Mirrors are high-efficiency front surface mirrors, which makes this system perfect for long-range perimeter or access guarding applications.

Models are available to comply with ANSI/RIA 15.06 and EN 999 beam spacing standards for operator safety and perimeter guarding.

Heights from 1238 to 1543 mm with two, three or four windows and are an economical way to guard large areas with just one emitter and receiver pair. Enclosures are available for all 36 cabled and quick-disconnect emitter and receiver pairs.