Anritsu Cell Master MT8213E compact handheld base station analyser
22 April, 2010 | Supplied by: Anritsu Pty Ltd
The Cell Master MT8213E compact handheld base station analyser with good noise and RF performance and 10 MHz demodulation bandwidth has been released. It is suitable to test and verify the performance of installed 2G/3G/4G networks, including LTE, GSM/EDGE, W-CDMA/HSDPA, WiMAX and CDMA/EV-DO.
Measurement and analysis with MSO/DPO oscilloscopes - Part 2
20 April, 2010
The prevailing DC power supply architecture in most modern systems is the SMPS because of its ability to efficiently handle changing input voltages and loads. It minimises the use of lossy components such as resistors and linear-mode transistors, and emphasises components that are (ideally) lossless.
Agilent InfiniiVision 7000 series mixed-signal and digital-storage oscilloscope range
24 March, 2010 | Supplied by: Keysight Technologies Australia Pty Ltd
Agilent has added 14 models to its InfiniiVision 7000 series mixed-signal and digital-storage oscilloscope range. The scopes offer bandwidths from 100 MHz to 1 GHz.
Bestech Digiforce 9306 universal test system
24 March, 2010 | Supplied by: Bestech Australia Pty Ltd
The Digiforce 9306 is a universal test system for press-fit, torque, clinch and process control.
Schaffner Modula-6100 immunity test system
24 March, 2010 | Supplied by: TechRentals
The Schaffner Modula-6100 immunity test system can be used for the simulation of electromagnetic interference effects. It is now available for rent.
Burster model 2316 Resistomat milliohmmeter
19 March, 2010 | Supplied by: Bestech Australia Pty Ltd
The Burster Resistomat milliohmmeter, model 2316, allows fast and accurate measurements of the smallest resistance values in ranges from 2 mΩ to 200 kΩ.
Yokogawa GS200 programmable DC voltage/current source
19 March, 2010 | Supplied by: Yokogawa Australia Pty Ltd
The Yokogawa GS200 is a programmable DC voltage/current source with high accuracy, high stability and high resolution.
Measurement and analysis with MSO/DPO oscilloscopes - Part 1
15 March, 2010
Power supplies can be found in many different electronic devices, from children’s toys to computers and office equipment to industrial equipment. They are used to convert electrical power from one form to another for proper device operation. Common examples are AC-to-DC converters which change AC voltages into regulated DC voltages or DC-to-DC converters which convert battery power into required voltage levels.
Agilent Technologies InfiniiVision 7000B series oscilloscopes
10 March, 2010 | Supplied by: http://www.agilent.com/find/7000B
14 models have been added to the InfiniiVision 7000 series mixed-signal and digital-storage oscilloscope portfolio. The scopes offer bandwidths from 100 MHz up to 1 GHz.
Schaffner Modula-6100 immunity test system
25 February, 2010 | Supplied by: http://www.techrentals.com.au
The Schaffner Modula-6100 immunity test system can be used for the simulation of electromagnetic interference effects. It is now available to rent.
Agilent Technologies N9030A PXA signal analyser
19 January, 2010 | Supplied by: Keysight Technologies Australia Pty Ltd
Agilent has released the N9030A PXA signal analyser, the highest performance member of the X-series, with a frequency coverage to 26.5 GHz.
Agilent Technologies N9000A CXA signal analysers
19 January, 2010 | Supplied by: Keysight Technologies Australia Pty Ltd
A pair of low-cost signal analysers that have a frequency coverage of up to 9.5 GHz has been released by Agilent. With a variety of built-in and optional measurement capabilities for today’s and future needs, the instruments are targeted at R&R and RF education.
Understanding VCO concepts
03 December, 2009 | Supplied by: Clarke & Severn Electronic Solutions
A voltage controlled oscillator circuit can be modelled as the combination of an amplifier with gain and a frequency dependent feedback loop as illustrated in Figure 1.
Probing for accurate baseband I/Q measurements
02 December, 2009 | Supplied by: Keysight Technologies Australia Pty Ltd
In modern digital communications systems the information content is typically created digitally and then used to modulate an RF signal. It is useful to evaluate the modulation, both before and after upconversion to diagnose any impairments in the conversion process.
Comtest buys 4128-D-002 head and torso simulator
28 November, 2009 | Supplied by: Comtest Group
Comtest has invested in a head and torso simulator (HATS) that incorporates a type 3.3 artificial ear.
