Multiport test set
27 April, 2009 | Supplied by: Keysight Technologies Australia Pty Ltd
Agilent has added the 2/4 port, 20 GHz option to its ENA network analysers, as well as introducing an E5092A configurable multiport test set.
High-voltage meters
24 April, 2009 | Supplied by: Westek Electronics Pty Ltd
The Vitrek 4600A series precision high-voltage meters comprise three models providing measurement to 20, 40 and 70 kV DC and AC as true RMS values.
Coherent OTDR
24 April, 2009 | Supplied by: Anritsu Pty Ltd
Anritsu’s MW90010A OTDR (C-OTDR) uses a coherent detection scheme to produce improved dynamic range and sensitivity.
Software for power meters
24 April, 2009 | Supplied by: Anritsu Pty Ltd
Anritsu has introduced PowerMax software providing an enhanced visualisation of instrument display and simplified remote control of the company’s ML2490A series power meters via ethernet.
Pulse/magnetic testing
24 April, 2009 | Supplied by: Westek Electronics Pty Ltd
The basic Teseq NSG 3060 system is designed to fulfil requirements for CE mark and ANSI C62.41 testing, including Combination wave, Ring wave and EFT pulses as well as PQT.
Multiplay testers
24 April, 2009 | Supplied by: Keysight Technologies Australia Pty Ltd
Agilent Technologies has introduced multiple test solutions that support the development and deployment of multiplay infrastructures.
Field tester with VoIP
24 April, 2009 | Supplied by: Anritsu Pty Ltd
Anritsu has released software version 3.5x for its CMA 3000 field tester.
Multifunction tester
24 April, 2009 | Supplied by: Eaton Electrical (Australia) Pty Ltd
Eaton has introduced the Kyoritsu 6016, 10-in-1 multifunction tester that is ergonomically styled with the top cover tucking in beneath the unit while in use.
Electrical safety analyser
24 April, 2009 | Supplied by: Domo-Technica Pty Ltd
The ESA620 electrical safety analyser has a selection of three test loads, two protective earth test currents and two insulation test voltages to perform all primary electrical safety tests as well as several additional leakage tests for premium standards compliance worldwide.
Sound meter
24 April, 2009 | Supplied by: RS
The testo 815 sound level meter has an accuracy of class 2 and is suitable for daily use whether it is for air conditioning or heating, disco noise, machine noise or noise in combustion systems.
Defibrillator analyser
24 April, 2009 | Supplied by: Domo-Technica Pty Ltd
The Impulse 6000D defibrillator analyser and Impulse 7000DP defibrillator/transcutaneous pacer analyser test systems are rugged, portable precision test instruments that ensure proper operation and ultimate performance of critical life-support cardiac-resuscitation equipment.
Optical transport analyser
24 April, 2009 | Supplied by: Yokogawa Australia Pty Ltd
The Yokogawa NX4000 is a transport analyser for testing 40 Gbps SONET/SDH and 43/44 Gbps OTN optical communication systems.
Calibration system
17 April, 2009 | Supplied by: Wireless Components
The modular calibration system from GE Sensing and Inspection is a handheld test and calibration system that combines a multifunction calibrator with pressure measurement and generation capability.
Precision ohm meter
17 April, 2009 | Supplied by: Westek Electronics Pty Ltd
The KoCoS Promet 100 precision ohm meter is suited to tasks including earth bond and weld testing as well as circuit breaker main contact testing.
Lightwave analyser
17 April, 2009 | Supplied by: Keysight Technologies Australia Pty Ltd
Agilent has introduced the fourth member of its lightwave component analyser series, claimed to be the only turnkey test solution for CATV or radio over fibre electro-optical component test.
