Satcam QCJ5 machine
21 May, 2010 | Supplied by: Satcam & RTD Circuit Design
The QCJ5 machine, with its third access motion control, can repair circuit boards, de-panel or create panels and housings.
Fluke Linkrunner Pro
19 May, 2010 | Supplied by: TechRentals
Troubleshooting or just maintaining a network can be time consuming and costly. Fluke Linkrunner Pro combined with Fluke Etherscope is an easy and non-expensive way to not only troubleshoot front-line IT problems and in-depth LAN analysis but also determine the quality of a LAN with RFC2544 tests which include latency, loss and BERT throughput.
NPA nylon hole plug and snap bushing
11 May, 2010 | Supplied by: NPA Pty Ltd
NPA has released a nylon hole plug and snap bushing to fill a gap in its range of hole sizes.
Die-cast aluminium enclosures
12 November, 2009 | Supplied by: http://www.hammondmfg.com/1550.htm
The Hammond Electronics 1550 range of general-purpose and IP66 die-cast aluminium enclosures is said to provide robust mechanical protection and good EMC attenuation levels.
POS system
10 November, 2009 | Supplied by: ICP Electronics Australia Pty Ltd
The EP-265 series, 250 cd/m² XGA all-in-one POS system features a free-to-adjust pole stand for second displays. The pole stand allows up, down, left and right (-45 to 45°) angle adjustments. The second display can face towards the customers for the best view and the main monitor can be adjusted within a range of 20-90°.
Prototype boards
10 November, 2009 | Supplied by: Glyn Ltd
SchmartBoard’s PCBs, available from Glyn High-Tech, are said to be the easiest electronic circuit prototyping system on the market.
Lithium battery holders
10 November, 2009 | Supplied by: NPA Pty Ltd
Keystone Electronics has introduced 1/3N lithium battery holders for surface or through-hole mounting.
Server racks
10 November, 2009 | Supplied by: Power Parameters Pty Ltd
Citec HDHC integrated server racks, incorporating the dual Citec rack fan with control display panel, are designed for use in high-power-density computer rooms.
PCB terminal blocks
20 October, 2009 | Supplied by: M Rutty & Co Pty Ltd
M Rutty has released a range of high-power terminal blocks and connectors enabling high current inputs and outputs to be connected to a printed circuit board.
Aluminium enclosures
15 October, 2009 | Supplied by: Hammond Electronics Pty Ltd
Hammond Electronics has launched the initial six sizes in its 1550 family, a range of industry standard sizes, small die-cast aluminium enclosures that provide robust mechanical protection and good EMC attenuation.
'Tin whiskers' being probed
30 September, 2009
The National Physical Laboratory (NPL) in Britain has been studying the allotropic phase transformation in tin and its alloys, commonly known as tin pest, to measure the implications of adopting lead-free solder manufacturing practices.
Carrying cases
17 September, 2009 | Supplied by: LaCie Pty Ltd
LaCie has introduced a range of hard drive carrying cases - Cover, Coat and Cozy.
Complete chassis
17 September, 2009 | Supplied by: Dedicated Systems Aust Pty Ltd
Schroff’s 19″ chassis series, multipacPRO, can now be ordered as a complete chassis, including top and bottom covers. Rear panels are detachable for easy machining.
IDC appliance outlet
16 September, 2009 | Supplied by: Avnet Electronics Marketing
The 6610 appliance outlet is said to be the first of its kind using IDC terminal technology. This allows a reduction of labour costs by supporting more efficient assembly. Multiple outlets can be banked and wire connections can be bused, connecting the terminals all at once.
Wall enclosures
15 September, 2009 | Supplied by: Soanar Limited
Teko Enclosure Solutions has introduced a range of wall-mount enclosures.
