Laird Technologies Tputty 506 series silicone putty
28 April, 2011 | Tekdis
Laird Technologies has expanded its thermal gap filler range with the release of Tputty 506 series silicone putty.
Advantech POC-C terminals
28 April, 2011 | Advantech Australia Pty Ltd
A range of medical-grade, fanless point-of-care terminals, the POC-C series terminals, designed for use in hospital operating rooms, ICUs, patient monitoring and on computer carts, is now available. The 15, 17 and 19″ devices are entry-level systems that are medically certified.
Adlink ASD industrial-grade solid state drive series
27 April, 2011 | Micromax Pty Ltd
Adlink has released the ASD series of industrial-grade solid state drives, designed to meet the needs of applications in severe environments.
Interworld Electronics SeaI/O-570 module
27 April, 2011 | Interworld Electronics and Computer Industries
Modbus Distributed I/O modules now include the SeaI/O-570 multifunction module that has a combination of analog and digital I/O.
Diodes SBR12U100P5/SBR12U120P5/SBR15U30SP5 super barrier rectifiers
26 April, 2011 | Arrow Electronics Australia Pty Ltd
Diodes has expanded its portfolio of super barrier rectifiers with the introduction of 12 and 15 A rated devices in the PowerDI5 package.
Diodes APX4558 low-noise op amps
25 April, 2011 | Arrow Electronics Australia Pty Ltd
With a low-input noise performance of 8nV/√Hz at 1 kHz, the APX4558 dual-channel op amps from Diodes meet demands for higher-performance audio without an increase in BOM cost.
National Semiconductor clock jitter cleaner range
25 April, 2011 | Arrow Electronics Australia Pty Ltd
National Semiconductor has introduced a family of clock jitter cleaners featuring what it claims is the industry’s lowest phase noise and RMS jitter performance: 111 femtosecond (fs) from 12 kHz to 20 MHz and a wideband noise floor of -162 dBc/Hz at 184 MHz output.
International Rectifier IR3550 PowIRstage device
24 April, 2011 | Avnet Electronics Marketing
International Rectifier has introduced the IR3550, the first in a family of integrated PowIRstage products that deliver higher efficiency and better thermal performance.
Balluff-Leuze semi-potted wind power supply
24 April, 2011 | Balluff Pty Ltd
An intelligent, energy-saving power supply especially for use in wind energy equipment is now available.
element14 development kit range
23 April, 2011 | element14
element14 (formerly Farnell) has enhanced its development kits to include the latest technologies for design engineers and maintenance, repair and operations professionals.
TDK-EPC Epcos BR6000-HD power controller
23 April, 2011 | Arrow Electronics Australia Pty Ltd
TDK-EPC has extended its range of power factor controllers with a heavy-duty version of the Epcos BR6000 device. It is suitable for applications that place high demands on electromagnetic compatibility (EMC) and the controller can also be used in a temperature range of -40 to +80°C.
Anritsu MS2711E Spectrum Master analyser
23 April, 2011 | Anritsu Pty Ltd
The MS2711E Spectrum Master analyser is designed for technicians, installers, field RF engineers and contractors responsible for monitoring the growing number of interfering signals, as well as assessing signal quality on a wide range of increasingly complex signals.
Flex data link ZHDL2/ZHR5 data link and socket range
22 April, 2011 | Samtec ANZ
Flex data link (ZHDL2 series) and socket (ZHR5 series) system is for high-speed and rugged cable-to-board applications where signal integrity matters.
Dominion G20 high-density connector
22 April, 2011 | Dominion Electronics
CompactPCI serial PICMG CPCI-S.0 is a new, independent base standard that introduces a connector, which enables a much higher signal density and supports even higher transmission frequencies of 12 Gbps and more.
Harting MicroTCA Backplane connector
22 April, 2011 | HARTING Pty Ltd
The MicroTCA backplane connector has passed the ruggedised environmental test according to the draft specification MTCA.3. The PICMG standards organisation has announced the completion of the MicroTCA Conduction Cooled testing.
