IEI IVC-T608 and IVC-T604 video capture cards
16 May, 2011 | ICP Electronics Australia
IEI has released the IVC-T608/4 standard definition software compression capture cards.
Conxall Micro-Con-X waterproof 7-pin connectors
12 May, 2011 | Clarke & Severn Electronic Solutions
Conxall’s Micro-Con-X waterproof connectors are now available in 4-, 5-, 6- and 7-pin configurations.
Harwin Datamate shielded connectors
10 May, 2011 | Clarke & Severn Electronic Solutions
Harwin says its 2 mm Datamate hi-rel connector family is now available with single-piece, machined metal backshells that provide electrical screening against RFI and EMI interference.
Taconic TSM-DS3 and RF-35TC thermal laminates
10 May, 2011 | Clarke & Severn Electronic Solutions
Taconic has introduced two laminates developed for high power applications where it is critical for the dielectric material to conduct heat away from other heat sources in the PWB design.
Clarke & Severn webshop range extended
10 May, 2011 | Clarke & Severn Electronic Solutions
Clarke & Severn has expanded the range of products available online via its webshop www.cseonline.com.au
RS Components 2011 catalogue
06 May, 2011 | RS
RS Components has launched its 2011 catalogue in Asia Pacific.
AWR Corporation process design kit
06 May, 2011 | Clarke & Severn Electronic Solutions
AWR Corporation has released a process design kit supporting Cree’s high-power gallium nitride (GaN) high electron mobility transistor (HEMT) monolithic microwave integrated circuit foundry process.
Advantech embedded platform series
06 May, 2011 | Advantech Australia Pty Ltd
A series of embedded boards based on the second-generation Intel Core i7 processor, featuring intelligent performance, power efficiency and integrated Intel HD graphics with DX10.1 support, has been released.
Omnetics Connector nano connectors
06 May, 2011 | Clarke & Severn Electronic Solutions
Omnetics Connector is using its nano-connector Bi-lobes to help handle difficult signal routing and interconnect issues.
Advantech SQF-SDM storage module
06 May, 2011 | Advantech Australia Pty Ltd
The SQFlash range has been expanded with a SATA disk on module model called SQF-SDM. The seven-pin DOM uses a SATA interface in a vertical module configuration that provides good shock and vibration resistance and is suitable for industrial PCs, embedded systems, gaming machines, POS, medical devices, automation systems and networking infrastructure.
Cree RF CGH35240F and CGH31240F S-band HEMTs
06 May, 2011 | Clarke & Severn Electronic Solutions
The Cree RF CGH35240F and CGH31240F are S-band, 240 W pulsed radar GaN HEMT transistors fully matched to 50 Ω. The CGH31240F operates from 2.7-3.1 GHz, while the CGH35240 operates from 3.1-3.5 GHz. They are both suitable for short and long pulse applications with good signal fidelity.
Cree RF CGH40006S GaN HEMT transistor
06 May, 2011 | Clarke & Severn Electronic Solutions
The Cree RF CGH40006S is claimed to be the first GaN HEMT transistor in a QFN plastic package.
Comus Sensolute MVS 1006.01/MVS 0608.02 micro vibration sensors
06 May, 2011 | Active Components (Aust) Pty Ltd
Comus has introduced two Sensolute products, the MVS 1006.01 and the MVS 0608.02. These are micro vibration sensors that detect any type of vibration using a micro ball (d=0.8).
Cree RF CMPA2735075F power amplifier
06 May, 2011 | Clarke & Severn Electronic Solutions
The CMPA2735075F from Cree RF is a gallium nitride (GaN) high electron mobility transistor (HEMT)-based monolithic microwave integrated circuit. GaN has superior properties compared with silicon or gallium arsenide, including higher breakdown voltage, higher saturated electron drift velocity and higher thermal conductivity.
Cree RF CGH40045 pill package transistor
06 May, 2011 | Clarke & Severn Electronic Solutions
The Cree RF GaN HEMT transistor CGH40045 is now available in a thermally enhanced pill package, suitable for small form factor HPAs, and allows reflow soldering to a heat sink. It offers the same performance in a smaller size.
