Protection > Filters

SCHURTER DIN-Rail mount adaptor kits for panel mount filters

01 August, 2022

SCHURTER DIN-Rail mount adaptor kits provide a simple solution for converting panel mount block filters to DIN-Rail mount for use inside control cabinets.


SCHURTER EC12 filtered power entry module with snap-in mounting option

17 June, 2022

SCHURTER has expanded its EC12 series with a version for snap-in mounting. The latest variant is designed to save panel space otherwise consumed by a mounting flange. It also provides quick and easy, well-secured installation.


SCHURTER FPBB RAIL filter family with triple protection

01 April, 2022

The double-stage FPBB RAIL filter family requires particularly little space on the mounting rail due to the slim 25 mm housing profile.


SCHURTER FMBD EP EMC filter

09 August, 2021

The FMBD EP is SCHURTER's flagship double-stage filter series for three phases with neutral line systems, available in variants with high nominal voltages.


SCHURTER FMBC EP double-stage, three-phase mains filter

19 January, 2021

The SCHURTER FMBC EP double-stage filter family for three-phase systems is suitable for the tight space conditions in today's machine and industrial plant construction.


FPBB RAIL — Compact DIN-Rail filter

01 July, 2018

The FPBB RAIL filter from SCHURTER is an extraordinarily slim double-stage, single-phase filter, measuring only 25 mm in width.


Mass-Vac MV Multi-Trap Vacuum Inlet Traps

26 March, 2018

MV Multi-Trap Vacuum Inlet Traps are suitable for MOCVD, HVPE, GaN and ALGaN processes that generate high volumes of particulates and condensable by-products in manufacturing HBLEDs and power semiconductors.


Hi-Q Components mains filters

09 August, 2017

Hi-Q Components stocks a large range of electronic components, including IEC inlet filters, mains line filters and PCB line filters.


TDK TCM0403R miniaturised thin-film common-mode filter

19 May, 2015

TDK Corporation has expanded its line-up of common-mode filters. The TCM0403R thin-film common-mode filter offers a common-mode attenuation of 27.5 dB at 850 MHz in a 0403 package (0.45 x 0.30 mm).


Schurter FMBC LL low leakage current three-phase filters

21 October, 2014

Schurter has expanded its range of FMBC NEO three-phase filters with a low leakage current series for applications where no high leakage currents are allowed. The FMBC LL series of filters is designed for rated currents between 7 and 180 A.


Choke filtering, EMI and ethernet

07 October, 2011

Common mode chokes filter common mode EMI currents without causing signal degradation and without derating under high currents. These components are applied to pairs of conductors - supply and return.


Schaffner sinusoidal FN5040/45 output filters range

07 September, 2010 by

A range of Schaffner sinusoidal FN5040/45 output filters which ensure cooler and more reliable drives has been released.


PD Devices DSP 600 series of surge protector devices

03 March, 2010 by

The PD Devices DSP 600 series of surge protector devices provides protection against incoming high-voltage spikes and slower rise time disturbances for single-phase (240 V) and three-phase (415 V) circuits.


40 nm-rated cartridge filter

16 November, 2009 by

WL Gore & Associates has introduced a 40 nm-rated filter, for use with chemicals in wet processes and distribution systems, providing 40 nm retention while maintaining the flow of 50 nm filters.


Low-leakage filters

20 October, 2009 by

Schaffner has introduced a low-leakage EMC/EMI, single-phase, 240 VAC filter series suitable for applications including medical apparatus, test and measurement devices and IT equipment as well as automation systems.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd