Component identifier
07 September, 2004 | Supplied by: http://www.altronics.com.au/
The Atlas Component Analyser identifies bipolar and Darlington transistors, enhancement and depletion mode MOSFETs, JFETs, triacs, thyristors, LEDs, bicolour LEDs, diodes and diode networks.
Prototype PCB plotter
04 August, 2004 | Supplied by: http://www.emlogic.com.au/
LPKF Laser & Electronics has released the ProtoMat H100 that allows reduction in the production time of prototype PCBs.
Heat sinks approved
31 July, 2004
Molex has received approval for its CoolFin heat sink from AMD for the next generation 64 bit processor, the Athlon 64.
Don't be afraid of lead-free soldering!
05 July, 2004 | Supplied by: Machinery Forum
On July 1, 2006 lead-free soldering finally becomes law for the manufacturers and suppliers of electronic components in Europe. Many small and medium sized companies but also large industrial producers feel left alone with the changes to come
Compact chassis
04 June, 2004 | Supplied by: http://www.ieci.com.au/
The JREX-CAGE1 is a compact chassis for Kontron's 3.5" embedded modules.
AMD approval for heat sink
01 June, 2004
Molex has receive approval for its CoolFin heat sink from AMD for the next generation 64 bit processor, the Athlon 64. As the result of meeting strict thermal resistance and other design requirements, Molex is one of a few vendors to receive AMD's approval on this new platform.
MB800H industrial motherboard
12 May, 2004 | Supplied by: Backplane Systems Technology Pty Ltd
Backplane Systems expects to show IBASE's first Pentium 4 industrial motherboard, the MB800H, at the National Manufacturing Week 2004 exhibition.
Compact chassis
12 May, 2004 | Supplied by: http://www.ieci.com.au/
The JREX-CAGE1 is a compact chassis for Kontron's 3.5" embedded modules.
PC cabinets
12 May, 2004 | Supplied by: http://www.nhp.com.au/
Available in five sizes, with either transparent or grey covers, the Fibox Cab PC polycarbonate range features 3 mm double bit key lock and a high IP65 rating.
Standardised boards
15 March, 2004 | Supplied by: Kontron Australia Pty Ltd
The JRex 3.5" CPU boards fit in between PC/104 modules that are suitable for low production volumes with a broad selection of off-the-shelf available I/O modules and custom baseboard designs that use CPU board standards such as ETX and DIMM-PC.
High current terminals
09 February, 2004 | Supplied by: NHP Electrical Engineering Products Pty Ltd
NHP has introduced the Wago 745 series of PCB terminal blocks for conductor cross sections of 4, 6 and 16 mm2 with a rated current of up to 57 A.
Wide apart worlds of lead-free soldering
05 January, 2004
The worldwide pressure to move away from traditional lead-containing solders has resulted in some intriguing differences of philosophy and approach around the world, which were highlighted during a recent British fact-finding mission to Japan
Vandal-resistant keyboards
17 December, 2003 | Supplied by: Backplane Systems Technology Pty Ltd
Backplane Systems has released Keymat's latest range of vandal-resistant keyboards, the Storm 2200 series.
Flange covers
28 October, 2003 | Supplied by: StockCap
StockCap has released a range of flange covers.
Rackmount system
28 October, 2003 | Supplied by: Helios Power Solutions
The AMT-N795 is a low profile 19" 1U rackmount chassis that houses a PCM5894 single board computer with a Pentium-233MMX CPU and 16 MB EDO RAM.
