Vishay LLP2510 four-line ESD-protection array
15 December, 2011 | Supplied by: Braemac Pty Ltd
Vishay has released a 4-line ESD-protection array in the ultra-compact LLP2510 package. Featuring a compact 2.5 mm x 1.0 mm footprint and ultra-low profile of 0.55 mm, the VBUS54ED-FBL offers low capacitance and leakage current for protecting high-speed data lines against transient voltage signals.
Making PCBs EMC compliant
09 November, 2011 by George Stavrinou, Westek Electronics | Supplied by: Westek Electronics Pty Ltd
PCB board design is often governed by established cost aspects. If a designer comes up with an EMC-proof design (in theory difficult, if not impossible to achieve without actually testing it as a product), they are likely to hear that it’s going to be expensive to lay it out according to their wishes.
EM Test N series EMC immunity test simulator range
19 October, 2011 | Supplied by: Consultant Technology Australia Pty Ltd
The compact ‘N’ series multifunctional EMC immunity test simulators from EM Test, covers a wide range of 32 common EMC immunity test standards.
Choke filtering, EMI and ethernet
07 October, 2011
Common mode chokes filter common mode EMI currents without causing signal degradation and without derating under high currents. These components are applied to pairs of conductors - supply and return.
Littelfuse SPF solar fuse
28 June, 2011 | Supplied by: Soanar Limited
The SPF solar fuse that protects photovoltaic applications up to 1000 VDC is now UL 2579 listed and designed and manufactured in accordance with IEC standard 60269-6.
Taconic RF-301 microwave laminate
05 April, 2011 | Supplied by: Clarke & Severn Electronic Solutions
The RF-301 from Taconic is a development of the company’s RF-30 generation. Highest PIM (passive intermodulation) performance, coupled with a good price/performance ratio, is claimed to make it the new standard for DK 3.0 substrates.
Agilent N9038A MXE EMI receiver
24 March, 2011 | Supplied by: Keysight Technologies Australia Pty Ltd
The N9038A MXE EMI receiver, designed for laboratories that perform compliance testing of electrical and electronic products, has been released.
Schaffner sinusoidal FN5040/45 output filters range
07 September, 2010 | Supplied by: NHP Electrical Engineering Products Pty Ltd
A range of Schaffner sinusoidal FN5040/45 output filters which ensure cooler and more reliable drives has been released.
Agilent N/W6141A electromagnetic compatibility measurement application
07 September, 2010 | Supplied by: Keysight Technologies Australia Pty Ltd
The N/W6141A electromagnetic compatibility measurement application for Agilent’s X-series of signal analysers is now available.
EMC and petrol engine interference
20 August, 2010 | Supplied by: Compliance Engineering Pty Ltd
For more than a decade now, Australia has had mandatory regulations in place for electromagnetic compatibility (EMC) for the majority of electric and electronic devices.
Schurter solar fuse ASO and fuseholder FSO
05 August, 2010 | Supplied by: Avnet Electronics Marketing
Schurter has introduced the solar fuse ASO and fuseholder FSO with quick-acting characteristics to protect photovoltaic and similar DC applications. The devices extend the strategic segment ‘renewable energy’ with a 1000 VDC fuse with a current range from 1 to 30 A and a touch safe fuseholder FSO.
Em Test ESD 30N tester
19 May, 2010 | Supplied by: Consultant Technology Australia Pty Ltd
The Em Test model ESD 30N is an ESD tester for simulating ESD pulses to 30 kV with discharges up to 20 Hz in both air and contact discharge modes.
EM Test ESD 30N ESD tester
22 April, 2010 | Supplied by: Consultant Technology Australia Pty Ltd
The EM Test ESD 30N is an ESD tester for simulating ESD pulses to 30 kV with discharges up to 20 Hz in both air and contact discharge modes.
Ponovo PSS01 circuit breaker simulator
19 March, 2010 | Supplied by: Power Parameters Pty Ltd
The Ponovo PSS01 circuit breaker simulator permits the completion of the protective relay testing ‘loop’ by simulating the circuit breaker normally activated by protective relays.
Westek Electronics MTE RLW series DIN-rail mounting line reactors
19 March, 2010 | Supplied by: Westek Electronics Pty Ltd
The MTE RLW series DIN-rail mounting line reactors provide other functions in addition to harmonics mitigation on the line side of variable speed drives.
