Weatherproof connectors
10 March, 2008Conxall has introduced the series of Con-X product, the Field Installable Shielded Multi-Con-X.
Miniature circular medical connectors
10 March, 2008Omnetics miniature circular medical connectors assist patient interface electronics. The connectors are available in three diameters and contacts from 2 to 27 pins with 0.05" centres with a latching option.
Connector for industrial areas
08 October, 2007Originally conceived for use in the medical area, the MEDI-SNAP push-pull series has developed into a connector for all industrial areas. MEDI-SNAP has 11 different contact inserts and maximum of 14 contact positions with an outer diameter of 14 mm.
Single row nano connectors
10 April, 2007Omnetics, a leading USA manufacturer of miniature high rel connectors, has launched a single row version of its Nano-Miniature Bi-lobe 0.635 mm pitch connector family, designed to deliver ultra-reliable signal contact direct from the PCB into the connector. With a profile of only 2.92 mm high, these connectors incorporate Omnetics' proven Nano Flex Pin contact and are the lowest profile metal-shelled connector available on the market.
Cable plugs
15 January, 2007Samtec Tiger Eye contacts are used in Micro Mate discrete wire cable plugs (SFSD series) to provide cable-to-board for the TFM/SFM series board-to-board interconnect system.
Connectors for industrial ethernet
06 September, 2006Innovation for today's advancement is offered by LTW Technology, the leader in design and manufacturing Asia's best waterproof connectors. Now dealing with Industrial Ethernet, LTW extends its products and services providing the finest waterproof connector for your industrial applications.
Cord range expanded
12 April, 2005Molex has added two cordset and receptacle versions to its RJ45 product family.
MT cable assemblies
03 March, 2005The high-density MT cable assemblies create space saving on the front panel by making configurations up to 72 fibres possible, while reducing installation times and lowering applied costs.
Bronze-plated coaxial connectors
03 February, 2005The Pulse N-201 connector from RFI utilises a white bronze plating finish, providing tarnish resistance and improved electrical performance.
Flat tinned copper earth braids
03 February, 2005Comprising over 70 sizes, the flat tinned copper range from Erico can be used for applications from 30 to 360 A.
Category 5 patch cords
28 November, 2003Molex Premise Networks has developed a range of slim boot enhanced category 5 patch cords.
Electronics interconnections for extreme space environments
13 October, 2003If all goes as planned, two rovers named Spirit and Opportunity will explore the surface of Mars next year, gathering geologic information and beaming the results back to Earth. However, the environment is so extreme that the rovers will be equipped with heaters to keep the electronic gear warm enough to operate properly as temperatures can dip to -120 degrees C. Futures space probes will involve even more extreme environments, with temperatures as high as 460 degrees Celsius on Venus and as low as -180 Celsius on Titan, the largest moon of Saturn.
Fire protected cable
09 September, 2003Olex has released a fire performance cable that was developed in conjunction with the Cooperative Research Centre for Polymers.
Flexible printed circuit connectors
05 June, 2003Hirose has released a 0.3 mm contact pitch, 1.25 mm above the board connector. FH23 series type FPC has a low insertion force and a high holding force. There is no need to hold the FPC after insertion in the connector. The connector will hold it in the correct position, allowing closing of the actuator. The number of contact positions available are 17, 27, 31, 33, 39 and 61.
Field Wireable Connectors
12 February, 2002Turck has released the IDC field wireable connectors for industrial automation applications that use eurofast (M12, 2 to 5 pin straight or right angle style) or picofast (M8, 3 and 4 pin straight style) field wireable connectors.
