Radiocrafts TinyMesh RC1140 and RC2500(HP) RF modules
01 July, 2014Radiocrafts TinyMesh is a powerful multi-hop mesh protocol with bidirectional wireless communication for control and monitoring of individual nodes. Easy to use, the modules only require set-up and configuring of devices; there is no need to develop firmware.
Radiocrafts RC17xxHP narrowband RF modules
27 June, 2014Radiocrafts' RC17xxHP radio module series provides narrowband radio performance combined with high output power for long-range industrial applications. The series covers all ISM bands below 1 GHz.
Wavelex WLD000130A1 RF load termination
21 May, 2014The WLD000130A1 is a wideband load RF termination from Wavelex. The product offers wide frequency band operation, from DC to 13.0 GHz, and features 20 W continuous wave (CW) power handling.
Texas Instruments ADC12J4000 wideband sampling and digital tuning device
27 February, 2014The ADC12J4000 is a wideband sampling and digital tuning device. The core technology contained in the device is Texas Instruments' gigasample analog-to-digital converter (ADC) technology that enables a large block of frequency spectrum to be sampled directly at RF. This technology is combined with low-power digital-processing blocks that provide digital filtering and down-conversion.
Peregrine PE42520 and PE42521 SPDT RF switches
27 November, 2013Peregrine Semiconductor Corporation has released two RF single-pole, double-throw (SPDT) switches. The PE42520 and PE42521 are pin-compatible upgraded versions of the PE42552, with higher power handling, fast settling and switching time, and high isolation.
Peregrine PE42820 and PE42821 SPDT RF switches
19 November, 2013Peregrine Semiconductor Corporation has released its two latest RF single-pole-double-throw (SPDT) switches. They are designed for LTE and 3G small cells, other wireless infrastructure systems and land mobile radios targeting LMR to LTE conversion.
LF noise research
20 March, 2013 by Mike Smyth, specialist technical writerGraphene has played a major role in providing an answer to an almost century-old problem of pink and flicker noise.
RFID technology for jewellery inventory management
08 October, 2012RFID simplifies stock counts because of its ability to provide tag processing of up to 50 pieces per second.
MiMOMax T-style antenna combiner range
23 February, 2012MiMOMax has released a range of compact wide-band, rugged, T-style ‘antenna combiners’.
Bourns PWR221T-30 power resistors
17 March, 2011 byelement14 has added the Bourns power resistor PWR221T-30 series to its inventory.
LDMOS takes on the power supply
10 March, 2011RF LDMOS (RF laterally diffused MOS), now referred to as LDMOS, is the dominant device technology used in high-power wireless infrastructure power amplifier applications for frequencies ranging from less than 900 MHz to 3.8 GHz.
M/A-COM Technology Solutions MABA-000001-50KIT1 design kit
14 May, 2010 byThe MABA-000001-50KIT1 transformer/balun designer’s kit simplifies RF design at the prototype stage.
Agilent Technologies handheld RF power meter
08 April, 2010The palm-sized V3500A handheld RF power meter includes a built-in display and integrated power sensor. The meter is a suitable power measurement solution for installation and maintenance environments, as well as for the R&D laboratory.
Benefits of high-power RF generators
15 March, 2010 by John S Hansen*, Senior Applications Engineer, Agilent TechnologiesIn RF testing, an essential attribute of every RF signal generator is the maximum output power it can supply to a device under test (DUT) while maintaining spectral purity and level accuracy. The ability to deliver a pure, accurate signal at +25 dBm or greater not only ensures improved measurement accuracy but also enables testing of extreme or unusual operating conditions.
CMX991 RF transceiver
28 July, 2009CML Microcircuits has introduced a high-performance, integrated RF quadrature/low IF transceiver IC, which features an image-reject, up-conversion modulation system and flexible superheterodyne receiver.
