SMT 5 W resistors
03 August, 2006 | Active Components (Aust) Pty Ltd
Now available from Active Components is the Phoenix Passives SEW5 series of 5 W wirewound SMT resistors, available in values from 0R47 to 4K7 with a 5% tol. (10% up to IR5). They have a temperature coefficient of ±100 ppm/°C and an insulation voltage >2000.
Barcode reader
03 August, 2006 | Micromax Pty Ltd
The PresencePlus P4 BCR vision sensor from Banner Engineering reads 2D and 1D barcodes including data matrix ECC200 and PDF 417, as well as linear codes such as 39, 128, Codabar, Interleaved 2 of 5, EAN-8 and EAN-13 (supports UPC-A).
Power quality relay
03 August, 2006 | Westek Electronics Pty Ltd
The PQ1 single-phase power quality sensor/relay from Power Standards Lab is a phase-to-neutral or phase-to-phase monitor suitable for a large range of industrial control applications.
Measurement Studio 8 remote monitoring
03 August, 2006 | National Instruments Aust Pty Ltd
National Instruments has released Measurement Studio 8, a suite of class libraries and controls for acquiring, analysing and presenting data in applications built using Microsoft Visual Studio.
Design software
03 August, 2006 | Altium Limited
Altium has released Designer 6.3 targeted at accelerating the design process. It includes upgraded translation capabilities for migration to Designer from other systems such as OrCAD and PADS.
Industrial labelling tool
03 August, 2006 | element14
The RhinoPRO 1000 is an easy to use, affordable, portable label printer that uses durable labels that stick and stay stuck. It is designed specifically for labelling electronics, audio and visual components, circuit panels and millions of other applications.
Standard clock oscillators
03 August, 2006 | Clarke & Severn Electronic Solutions
Cardinal Components Inc. introduces new low phase noise, low jitter, high frequency, RoHS compliant programmable, LVPECL, LVDS, VCXO's and Standard Clock Oscillators.
Big bandwidth storage
02 August, 2006 | Dell Technologies
Dell has launched the PowerVault MD1000, a direct-attached storage enclosure that gives gains in bandwidth, capacity and performance.
Standard and weathertight connectors
04 July, 2006 | Clarke & Severn Electronic Solutions
A completely indoor/outdoor connector system that offers performance and reliability features of MIL-Spec connectors at the cost of a commercial type product.
Speedway design workshop
04 July, 2006 | Avnet Electronics Marketing
Avnet ANZ presents in-depth technical training on the latest Xilinx technologies. The 2006 June to September SpeedWay Design Workshop series will be held in 7 cities across Australia and New Zealand.
Bipolar transistors
04 July, 2006 | Ampec Technologies Pty Ltd
Combining complementary NPN and PNP transistors in the SOT236 package, the ZXTC2045E6 from Zetex Semiconductors produces the drive requirement needed to switch high power MOSFETs and IGBTs in power supply designs.
Dealing with ball-grid-arrays
04 July, 2006 | Electrolube
Hakko has introduced its range of products to meet the requirements of today's complex soldering tasks including lead-free and ball-grid-arrays.
Automated solder application
04 July, 2006 | Nordson Australia Pty Ltd
EFD's SolderPlus dispensing system integrates three EFD products - EFD SolderPlus solder paste, a dispense valve, and an XYZ positioning platform - into a way that automates solder application in benchtop assemblies.
Embedded platforms
04 July, 2006 | Kontron Australia Pty Ltd
Parallel to the launch of the Intel Core Duo processors, Kontron has introduced four embedded computing platforms with the Duos and a mini-ITX motherboardv, a 3U and 6U CompactPCI board and an ETXexpress module.
Signal source analyser
04 July, 2006 | Rohde & Schwarz (Australia) Pty Ltd
The characteristics of transmit and receive modules for radio transmissions are determined primarily by the phase noise of the oscillators in use.