ADLINK EtherCAT solution
09 July, 2015 | ADLINK Technology IncThe ADLINK EtherCAT solution consists of the Talos-3012 automation controller and EPS Series I/O and motion control system. The solution provides time-deterministic control of automatic processes.
IEI Integration PPC-F12B-BT industrial panel PC
09 July, 2015 | ICP Electronics AustraliaIEI Integration's PPC-F12B-BT is an intelligent, metal bezel panel PC. Powered by the Intel Celeron J1900 quad-core SoC, the industrial panel PC can support up to 8 GB DDR3 SO-DIMM.
iBase IB909 Series single-board computer
07 July, 2015 | Backplane Systems Technology Pty LtdThe iBase IB909 Series is a 3.5″ SBC with onboard 5th Generation Intel Core i U-series processors. The product offers good computing performance, low power consumption and hyperthreading technology.
Mornsun LN series AC/DC converters for extreme temperatures
07 July, 2015 | DLPC Pty LtdThe Mornsun LN series 1 to 3 W AC/DC converters don't require any electrolytic capacitors; they therefore solve the problems of poor high/low-temperature characteristics and short lifespans in power products caused by electrolytic capacitor limitations.
Photoetch Industries radiofrequency shielding
06 July, 2015 | Photoetch Industries LtdPhotoetch Industries uses the chemical milling process to manufacture RF and EMI shielding in long or short runs. Manufacturing tolerances can be as tight as 0.1 mm. Part numbers and lettering can be etched into one side for easy identification.
Renesas RX231 32-bit microcontrollers
06 July, 2015 | Braemac Pty LtdRenesas Electronics has announced the RX231 group of 32-bit microcontrollers (MCUs). The series is suitable for applications that require high processing performance in environments with low current supply capacity.
Rohde & Schwarz FSWP phase noise analyser and VCO tester
06 July, 2015 | Rohde & Schwarz (Australia) Pty LtdThe R&S FSWP phase noise analyser and VCO tester enables ultrasensitive and ultrafast phase noise measurements. It also allows users to easily measure pulsed sources and residual phase noise of RF components.
Micreo contract manufacturing, project management and RF product design
05 July, 2015 | Micreo LimitedMicreo is an Australian business providing high-technology design and manufacturing services for the aerospace/high-reliability electronics market.
congatec Qseven IoT kit
05 July, 2015 | Congatec Australia Pty Ltdcongatec's Qseven IoT kit is said to make it quick and easy to develop applications for the Internet of Things (IoT). The kit provides a complete starter set for the rapid prototyping of embedded IoT applications.
Ingun MA 20xx series manual stand-alone test fixtures
05 July, 2015 | Redback Test ServicesThe MA 20xx-series manual test fixtures are designed as stand-alone test fixtures rather than exchangeable test fixtures. They are used for industrial testing of electronic devices.
National Instruments LabVIEW 2015 system design software
04 July, 2015 | National Instruments Aust Pty LtdNI LabVIEW is a development environment optimised for engineers and scientists creating test, measurement and control applications.
Algocraft WriteNow! ISP programming technology
04 July, 2015 | Redback Test ServicesAlgocraft has designed WriteNow! ISP programming technology that allows users to reach the theoretical programming speed for any given device on up to eight devices at once.
congatec conga-QA4 Qseven module
04 July, 2015 | Congatec Australia Pty LtdThe conga-QA4 module features the Intel Pentium and Celeron processors based on 14 nm technology and is said to offer increased energy savings and computing power. The optimised Intel Gen8 graphics, with up to 16 EUs (graphics execution units) and 4K (3840 x 2160 pixels) resolution, result in a good visual experience.
National Instruments PXIe-8880 controller
03 July, 2015 | National Instruments Aust Pty LtdThe NI PXIe-8880 is a high-performance Intel Xeon E5-2618L v3 processor-based embedded controller for use in PXI Express systems.
Entech Electronics contract manufacturer
03 July, 2015 | Entech GroupEntech Electronics is an electronic contract manufacturer with 25 years of ISO9001 certification. The company's assembly facility services both low- and high-volume production and operates a dedicated prototyping cell.
