DC-DC converter module tips to achieve up to ±1% regulation
Supplied by Vicor on Thursday, 09 April, 2020
The DC-DC converter module (DCM) provides isolation, regulation, fault protection and monitoring in a single module. In either single DCM circuits or in arrays, the nominal load regulation is about 5% excluding other regulation error terms. This may not be sufficient for applications that have tight voltage regulation requirements.
Learn how to reach a regulation accuracy of ±1% at all line, load, temperature and trim conditions for single DCMs as well as arrays of up to eight units.
Comparing the incomparable: understanding and comparing IGBT module datasheets
This white paper explains the component parameters of IGBT modules, points out possible...
Your definitive guide to EMC and power supply
Understand the basics of EMC and apply this knowledge to your power supply.
16-bit oscilloscopes can fulfil demand for high detail
The vertical resolution of an oscilloscope determines how accurately signals are displayed....
