Test & measure

Tektronix MDO3000 mixed domain oscilloscopes

30 October, 2014 | Supplied by: Vicom Australia Pty Ltd

The Tektronix MDO3000 series oscilloscopes feature two or four analog input channels with bandwidth ranging from 100 MHz to 1 GHz, 16 digital channels (optional) and one RF input channel matching the bandwidth of the oscilloscope (9 kHz up to analog bandwidth).


Preventive maintenance of wireless infrastructure with a PC-driven VNA

23 October, 2014 by Copper Mountain Technologies | Supplied by: Clarke & Severn Electronic Solutions

Traditional network analysers are large, heavy and intended for use in indoor engineering laboratories or production environments. For field use, a network analyser must overcome several limitations of traditional instruments.


Rigol DSA800 Spectrum Analyzers Series

24 September, 2014 | Supplied by: Emona Instruments Pty Ltd

The Rigol DSA800 Spectrum Analyzers Series enable precise direct measurements of higher frequency signals and systems, complete with built-in tracking generators.


Keithley Model 2280S precision-measurement DMM/power supply

24 September, 2014 | Supplied by: Scientific Devices Australia

Keithley has released the Model 2280S precision-measurement DMM/power supply. The Model 2280S-32-6 can output up to 32 V at up to 6 A, while the Model 2280S-60-3 can output up to 60 V at up to 3.2 A.


Spectrum M4i series digitiser cards firmware options

02 September, 2014 | Supplied by: TRIO Test & Measurement

Using hardware-based data analysis and reduction technology, Spectrum has created firmware options that allow its high-speed M4i series digitiser cards to perform peak detection and output the corresponding statistical data.


Anritsu Network Master Pro MT1000A network transport tester

01 September, 2014 | Supplied by: Anritsu Pty Ltd

As network operators install technologies such as OTN, MPLS-TP and Ethernet in their metro and backhaul networks, the operator needs to support fibre channel links while continuing to maintain legacy PDH and SDH networks. The Network Master Pro MT1000A brings these network test requirements to a portable device, making it a suitable tool for field testing.


Rohde & Schwarz SGT100A vector signal generator and FPS signal and spectrum analyser

30 August, 2014 | Supplied by: Rohde & Schwarz (Australia) Pty Ltd

Rohde & Schwarz has released the FPS signal and spectrum analyser and the SGT100A vector signal generator - two products which are fast, compact, combinable and easy to integrate.


Signalhound BB60C spectrum analyser and RF recorder

15 August, 2014 | Supplied by: Silvertone Electronics

The BB60C spectrum analyser and RF recorder streams 140 MBps of digitised RF to a PC utilising USB 3.0, providing an instantaneous bandwidth of 27 MHz and sweep speeds of 24 GHz/s.


EMC Partners IMU4000 test system

14 August, 2014 | Supplied by: Test & Measurement Australia

The IMU4000 test system introduces a graphical user interface that every mobile device user will recognise.


Narda Interference and Direction Analyzer IDA 2

12 August, 2014 | Supplied by: Scientific Devices Australia

The Narda Interference and Direction Analyzer IDA 2 has been specially developed for identifying and localising interference, impairments and unknown sources. It is not simply a receiver with antennas attached but a complete all-in-one measuring system that is tailored precisely to its application: efficient source localisation.


Rohde & Schwarz HMO1002 digital oscilloscope

05 August, 2014 | Supplied by: Rohde & Schwarz (Australia) Pty Ltd

The R&S HMO1002 digital oscilloscope from the Rohde & Schwarz Value Instruments product range offers high sensitivity and multifunctionality. From embedded developers to service technicians and educators, the product addresses a broad group of users.


MathWorks Simulink Real-Time application simulation and testing

03 August, 2014 | Supplied by: MathWorks Australia

MathWorks has introduced Simulink Real-Time into the Simulink product family. Available with the company's Release 2014a (R2014a), the product enables engineers to build, test and run real-time applications from Simulink models on dedicated target computer hardware connected to their physical systems.


National Instruments VirtualBench all-in-one instrument

03 August, 2014 | Supplied by: National Instruments Aust Pty Ltd

NI has announced VirtualBench, an all-in-one instrument that integrates a mixed-signal oscilloscope, function generator, digital multimeter, programmable DC power supply and digital I/O. Users interact with the product through software applications that run on PCs or iPads.


R&S RTO-K24 compliance test software for oscilloscopes

02 August, 2014 | Supplied by: Rohde & Schwarz (Australia) Pty Ltd

Rohde & Schwarz has expanded the application field of the R&S RTO oscilloscopes to include the testing of automotive Ethernet interfaces. In line with the OPEN Alliance test specification, the R&S RTO-K24 compliance test software enables users to perform automated tests on BroadR‑Reach Ethernet interfaces.


Agilent Infiniium S-Series and InfiniiVision 6000 X-Series oscilloscopes

02 August, 2014 | Supplied by: TRIO Test & Measurement

TRIO T&M has introduced two oscilloscope families with 30 models from 500 MHz to 8 GHz.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd