Test & measure > Instruments

Spectrum M4i series digitiser cards firmware options

02 September, 2014

Using hardware-based data analysis and reduction technology, Spectrum has created firmware options that allow its high-speed M4i series digitiser cards to perform peak detection and output the corresponding statistical data.


Anritsu Network Master Pro MT1000A network transport tester

01 September, 2014

As network operators install technologies such as OTN, MPLS-TP and Ethernet in their metro and backhaul networks, the operator needs to support fibre channel links while continuing to maintain legacy PDH and SDH networks. The Network Master Pro MT1000A brings these network test requirements to a portable device, making it a suitable tool for field testing.


National Instruments VirtualBench all-in-one instrument

03 August, 2014

NI has announced VirtualBench, an all-in-one instrument that integrates a mixed-signal oscilloscope, function generator, digital multimeter, programmable DC power supply and digital I/O. Users interact with the product through software applications that run on PCs or iPads.


Copper Mountain Technologies S7530 75Ω vector network analyser

12 July, 2014

Copper Mountain Technologies' S7530, a 75Ω compact vector network analyser, is suitable for cable and satellite TV industries, including equipment development and manufacturing.


Rohde & Schwarz ZNBT8 multiport vector network analyser

01 July, 2014

The R&S ZNBT8 is claimed to be the first multiport vector network analyser offering up to 24 integrated test ports. The instrument can simultaneously test multiple DUTs or measure one DUT with up to 24 ports.


American Sensor Technologies AST4530 submersible pressure transducer

02 June, 2014

The AST4530 submersible pressure transducer is constructed using PVDF material and a PTFE diaphragm. Designed to measure liquid level of harsh liquids, the product features a submersible PVDF cable, cord grip and housing.


Gamry Interface 1000 potentiostat

03 March, 2014

The Interface 1000 is a potentiostat/galvanostat/ZRA for use in general electrochemistry applications. It is suitable for corrosion measurements, battery testing, sensor development and physical electrochemistry. The product features nine current ranges and three gain stages, and covers everything from corrosion to batteries and sensors to supercaps. It has a full 1 A of current up to the compliance limit of ±20 V.


Agilent Technologies E5063A ENA Series network analyser for testing simple RF passive components

28 February, 2014

Agilent Technologies has announced the E5063A ENA Series network analyser. The instrument offers optimised performance and functionality for testing simple RF passive components, such as handset/BTS antennas, RF cables and filters. The product provides high RF performance, including trace noise of 0.002 dBrms and stability of 0.01 dB/°C. This helps reduce test cost without sacrificing quality.


Erntec 3890 CR DC micromotors

13 February, 2014

The 3890 CR series from Erntec is based on the motor concept of the CR DC micromotors series with graphite commutation from Faulhaber.


Tektronix P6015 High Voltage Probe

18 December, 2013

The Tektronix P6015 High Voltage Probe is suitable for heavy-duty, high-performance testing of voltages over 2.5 kV. Designed to measure up to 20 kV RMS and with pulses up to 40 kV (peak, 100 ms duration), it is available to rent from TechRentals.


Michell Optidew chilled mirror hygrometer

12 December, 2013

Michell's Optidew Chilled Mirror Hygrometer meets the Code of Federal Regulations for Engine Testing - an essential requirement for any instrument used for emissions testing in the US and many other regions.


Device to detect electromagnetic attacks

05 December, 2013

Scientists at the Fraunhofer Institute for Technological Trend Analysis INT, in Euskirchen, Germany, are researching how to detect 'attacks' from electromagnetic fields. Electromagnetic pulses can interfere with or damage electronic devices but, since electromagnetic radiation is invisible, those affected by it do not know why their machines break down.


Tektronix TBS1000 series digital storage oscilloscopes

11 October, 2013

The Tektronix TBS1000 series digital storage oscilloscopes come with 4-channel models to deliver digital real-time sampling, pass/fail testing and easy-to-use controls.


Fluke VT02 visual IR thermometer

08 August, 2013

The Fluke VT02 visual IR thermometer is a troubleshooting camera with an infrared heat map.


Sherlock-300 series automated optical inspection (AOI) systems

19 July, 2013

Sherlock-300 series automated optical inspection (AOI) systems provide good defect coverage, average cycle times of 10 s/board (including transport), low false call and false accept rates (FCR and FAR) for a wide range of production environments. All three models - benchtop, inline and batch - feature as standard fast multitouch touch-screen control.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd