Test & measure > Clamps

Fluke 393FC, 377FC and 378FC clamp meters

10 June, 2022

Fluke has released a variety of clamp meters, for non-invasive and safe AC and DC measurement.


Hioki FT6380 and Hioki FT6381 precision earth resistance measurement clamp-on testers

29 May, 2017

The Hioki FT6380 and Hioki FT6381 are precision earth resistance measurement clamp-on testers.


Hioki CM3286-01 clamp tester

08 May, 2017

The Hioki CM3286-01 clamp tester offers Bluetooth wireless communications functionality.


Ppram769-Hioki high-frequency current probes

13 December, 2016

The Ppram 769-Hioki high-frequency current probes are suitable for connection to oscilloscopes and waveform recorders.


Luthi coupling networks

31 July, 2013

Lüthi has a wide selection of appropriate coupling/decoupling networks (CDNs), EMC measuring clamps and accessories for conducted immunity testing and emission measurement.


Seaward PAC3760 Plus II portable appliance and RCD tester

25 July, 2013

The Seaward PAC3760 Plus II portable appliance and RCD tester is based on the PAC3760 series of portable appliance testers.


Fluke recalls digital clamp meters

14 February, 2013

Fluke is voluntarily recalling its 373, 374, 375 and 376 digital clamp meters that were manufactured between 1 September 2010 and 1 October 2012.


Fluke 320 true-RMS clamp meters

14 August, 2012

Fluke Corporation has introduced the 320 series true-RMS clamp meters that produce noise-free measurements in tough environments.


Fluke 381 remote display clamp meter

09 December, 2010

Wireless technology allows the display of the Fluke 381 remote display clamp meter to be carried up to 10 m away from the point of measurement.


Jaycar QM-1563 one-hand operation clamp meter

07 September, 2010 by

One-hand operation of the QM-1563 clamp meter makes it suitable for the working installer or tradesman. It is an intermediate-level device with current ranges up to 400 A AC and DC.


Power Parameters Hioki 3280 series of clamp testers

13 August, 2010 by

The Hioki 3280 series of clamp testers with double opening jaws enables clamping of conductors up to 33 mm in diameter and 35 mm (model 3288 and 3287) even in confined spaces.


Milliamp clamp meters

17 August, 2009 by

Fluke has announced the 772 and 773 mA clamp meters, designed to measure 4 to 20 mA signals without ‘breaking the loop’.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd