Electrolube UVCL range of UV cure conformal coatings
01 July, 2019 | Supplied by: ElectrolubeElectrolube, the global manufacturer of electrochemicals, developed the UVCL range of UV cure conformal coatings to meet the various requirements of electronics, LED and automotive manufacturers, with the additional benefit of increasing production time and offering higher levels of performance.
Kontron APPROTECT encryption framework
28 June, 2019 | Supplied by: Kontron Australia Pty LtdKontron APPROTECT encrypts an application's source code in a way that makes reverse engineering impossible, featuring copy protection, IP protection and protection from reverse engineering and tampering.
Harwin S0911-46R and S0921-46R EMI/RFI shield clips
17 May, 2019 | Supplied by: Clarke & Severn Electronic SolutionsCovering a surface area of 2.3 x 1.2 and with 2 mm height, Harwin's S0911-46R shield can clip is designed to address the demands being set by the latest generation of high-density electronic systems.
Getting the best performance from resin encapsulants
01 May, 2019 | Supplied by: ElectrolubeIn this article on resin potting and encapsulation, resins expert Alistair Little expands on a Q&A guide format with some advice on selection and application.
The positive outcomes of antistatic flooring
08 April, 2019 | Supplied by: Tremco CPG Australia Pty LtdState-of-the-art technology can achieve incredible things — but only if each and every delicate component and piece of equipment is protected from a wide range of issues.
Dow DOWSIL EI-2888 Primerless Silicone Encapsulant
05 April, 2019 | Supplied by: Dow Chemicals Australia LtdThe DOWSIL EI-2888 Primerless Silicone Encapsulant, from Dow, is an optically clear silicone for professional LED lighting that cures at room temperature.
Polyurethane encapsulants — enhanced protection for LEDs in challenging environments
01 April, 2019 | Supplied by: ElectrolubeThe use of an encapsulation resin to protect LEDs has become increasingly common over the past few years.
DuPont Zytel HTNFR42G30NH polyamide resin
07 February, 2019 | Supplied by: DuPont Australia Pty LtdDuPont Transportation & Advanced Polymers has available the DuPont Zytel HTNFR42G30NH — a non-halogenated, flame-retardant, high-performance, bio-based PPA for SMT (surface mount technology) connectors and a broad range of electrical components.
Electrolube ER2224 thermally conductive encapsulation resin
01 February, 2019 | Supplied by: ElectrolubeThe ER2224 epoxy potting compound is a highly thermally conductive resin (1 W/m•K) that also offers strong thermal cycling properties.
EXAIR Gen4 Super Ion Air Wipe
17 January, 2019 | Supplied by: Compressed Air Australia Pty LtdEXAIR's Gen4 Super Ion Air Wipe provides a uniform, 360° ionised airstream that clamps around a continuously moving part to eliminate static electricity and contaminants. It is suitable for removing dust, particulates and personnel shocks on pipe, cable, extruded shapes, hose, wire and more.
EXAIR Gen4 Ionizing Bar
27 November, 2018 | Supplied by: Compressed Air Australia Pty LtdEXAIR's Gen4 Ionizing Bar eliminates static on plastics, webs, sheet stock and other product surfaces where tearing, jamming or hazardous shocks are a problem.
Coilcraft 1812CAN Series common-mode chokes
12 November, 2018 | Supplied by: TRI Components Pty LtdCoilcraft's 1812CAN Series common-mode chokes provide noise suppression on CAN (1 Mbps) or CAN FD (5 Mbps) data lines in automotive and industrial automation applications.
Intelligent power box slims down cable harnesses
09 November, 2018 | Supplied by: Wurth Electronics Australia PtyFor the past three years, special vehicles manufacturer Dieci has implemented the REDline Power Box Hybrid as a combined high-current fuse box, electrical distribution box and CAN bus splitter.
How to 'design out' production problems
08 November, 2018 | Supplied by: ElectrolubeElectrolube's Phil Kinner provides some design pointers that will help you avoid some common pitfalls when applying conformal coatings.
The powerful impact of protecting LED lighting applications
02 November, 2018 | Supplied by: ElectrolubeModern protective compounds and thermal management materials are prolonging the life of LED lighting units exposed to challenging environments.
