IDEC RV8S solid-state interface relays
23 February, 2015IDEC Corporation has announced the RV8S solid-state interface relay, featuring 100 mA to 3A switching capability in a compact 6 mm wide space. Other features include high switching cycles, extended operating life and high-speed load switching.
IDEC RV8S solid-state interface relays
23 February, 2015IDEC Corporation has announced the RV8S solid-state interface relay, featuring 100 mA to 3A switching capability in a compact 6 mm wide space. Other features include high switching cycles, extended operating life and high-speed load switching.
Harting HanOnBoard data, signal and power relay
30 May, 2014Harting has developed a device that permits the use of Han products while making it possible to avoid the disadvantages of manual wiring. With HanOnBoard, connectors are connected with a PCB using an adapter through which data, signals and power are distributed.
SIL3 coupling relay connects safety controllers to actuators
03 March, 2013In addition to ensuring safety when circuits are opened, accounting for safety when circuits are closed is also becoming increasingly important. Modules for electrically isolating actuators and for adjusting power are used especially in the process industry. For this purpose, the Phoenix Contact PSR-ETP coupling relay has been developed specifically for this industry and is certified in accordance with SIL 3.
TE Connectivity Schrack force guided relay range
28 June, 2012TE Connectivity’s Schrack series of force guided relays that can be used in robotics and industrial automation applications has been released.
Weidmuller SIL 3 safety relay
07 May, 2012The SIL 3 safety relay is for use in the emergency shutdown of plants and plant components in the process industry.
Phoenix Contact PSR-ESAM 4 safety relay
07 February, 2012The Phoenix Contact PSR-ESAM 4 safety relay can be used in any application and is available for various supply voltages.
Hirschmann OZD Profi G12 ATEX repeater range
14 July, 2011 byBelden Singapore has launched the Hirschmann OZD Profi G12 ATEX, Profibus FO repeaters certified for use in hazardous locations, zones 1, 2, 21 and 22. The optical ports are intrinsically safe and have got op-is approval.
element14 parts available
28 April, 2011 byelement14 has increased its parts inventory to include over 14,000 electromechanical products for electronics design engineers and purchasing professionals across Asia-Pacific.
International Rectifier RAD-Hard solid state relay
15 November, 2010 byInternational Rectifier has introduced a RAD-Hard solid state relay for power bus switching, heater control circuits and battery charging used in high-reliability, space-qualified applications.
ABB E250 range of latching relays
03 March, 2010 byThe E250 range of latching relays is suitable for applications where a simple method of sequencing is required and offers a changeover of contact position after an impulse signal from a pushbutton.
EMR switch matrix
10 November, 2009 byPickering Interfaces has introduced the 60-511 low thermal EMF 56x33 EMR (electromechanical relay) matrix, for applications requiring low thermal EMF errors for data acquisition and low voltage measurements.
Crydom solid-state relays
01 June, 2009Crydom’s D1D and D2D series of FET output DC solid-state relays, formerly rated up to 40 A at 100 VDC and 12 A at 200 VDC, now include models rated at 60, 80 and 100 A at 100 VDC as well as 40 A at 200 VDC.
Solid-state relays
27 April, 2009 byCrouzel Solid-state Relays has announced the improved GN series of solid-state relays.
Protection relays
17 April, 2009 byProtection relay testing instrumentation (ARTES series) is suitable for testing many types of protection relays, including distance, impedance, phase, earth/phase fault and synchronicity devices.
