Products

Marl International LED light prototyping service

18 December, 2012 | Aerospace & Defence Products

Marl International has announced a fast prototyping service for LED lighting products. The company can normally produce a user-specified prototype printed circuit board (PCB) populated with surface-mount LEDs within 48 h.

Schurter USFF 1206 50 mA surface mount chip fuse

14 December, 2012 | SCHURTER (S) PTE LTD

Schurter has expanded its range of surface mount chip fuses with its USFF 1206 50 mA fuse. The 50 mA fuse has a lower voltage loss and an exact opening time which provides a safe solution for the optimal operation of sensitive electronic systems.

Fluke CNX Wireless System

14 December, 2012 | Fluke Australia Pty Ltd

The Fluke CNX Wireless System simplifies troubleshooting by enabling up to 10 simultaneous electrical and temperature wireless measurements.

Narda Industrial Field Meters NIM-511 and NIM-513

13 December, 2012 | Narda Safety Test Solutions GmbH

The Narda Industrial Field Meters NIM-511 and NIM-513 measure radiation emitted by equipment that uses industrial frequencies.

MEN Mikro Elektronik G302 and G303 industrial ethernet switches

12 December, 2012 | Dominion Electronics

The MEN Mikro Elektronik G302 (managed) and G303 (unmanaged) CompactPCI Serial switches offer three gigabit ethernet ports via RJ45 or M12 connectors. The G302 has a service interface at the front, which is also accessible via an M12 connector.

Dytran model 3220M27 IEPE accelerometer

11 December, 2012 | Metromatics Pty Ltd

The Dytran model 3220M27 is a low-profile, ring-shaped IEPE accelerometer with an overall weight of just 2.7 g.

Acromag ACEX4405 carrier board for COM Express modules

11 December, 2012 | Metromatics Pty Ltd

The Acromag ACEX4405 is a rugged carrier board for COM Express modules offering a wide assortment of peripheral I/O connections and a mini PCIe slot for production or prototype systems.

Laird Technologies Thin Film Thermoelectric Handbook

11 December, 2012 | Lastek Pty Ltd

Laird Technologies, a designer and manufacturer of customised, performance-critical components for wireless systems and other advanced electronics applications, has published its Thin Film Thermoelectric Handbook.

Bluegiga BT111 Bluetooth Smart Ready HCI Module

11 December, 2012 | Glyn Ltd

Bluegiga Technologies has available the Bluetooth Smart Ready HCI module, BT111.

M2M NV08C-MCM GNSS receiver

11 December, 2012 | M2M Connectivity

The NV08C-MCM is an integrated satellite navigation receiver. The key feature of the product is its compatibility with both the global navigation satellite systems (GNSS) that have been deployed so far in the world - GPS and GLONASS.

Flex-ATX motherboard KTA75/Flex with AMD R-Series APU

10 December, 2012 | Kontron Australia Pty Ltd

The Kontron embedded Flex-ATX motherboard KTA75/Flex, based on the AMD Embedded R-Series accelerated processing unit (APU) and the AMD A75 controller hub, is designed for graphics-intensive and highly parallel embedded computing applications. It provides good, long-term stability and reliability due to its sophisticated board layout with long-term stable solid capacitors and a high-quality selection of components.

Osram Opto Semiconductors 1 mm2 infrared chip prototype

10 December, 2012 | Osram Australia Pty Ltd

The 1 mm2 infrared chip prototype from Osram Opto Semiconductors has achieved an efficiency of up to 72% at 100 mA using thin-film technology. At 930 mW from an operating current of 1 A, its light output under laboratory conditions is claimed to be 25% higher than that of the chips currently available on the market, which means that future infrared LEDs can be made even more energy-efficient.

TDK Corporation CJA series of TDK SRCT capacitors

10 December, 2012 | TDK Australia

TDK Corporation has developed the CJA series of TDK SRCT capacitors in case size 0603 (EIA 0201). Compared to existing multilayer ceramic capacitors (MLCCs) of the same case size, the mounting footprint has been reduced by 50%. In this design with bottom terminals, a solder resist prevents wetting of the face and side areas of the MLCCs with solder.

Michell Instruments DT722 RH and temperature transmitter

07 December, 2012 | AMS Instrumentation & Calibration Pty Ltd

Maintaining reliable relative humidity (RH) measurements in harsh or corrosive environments is notoriously difficult as the conditions themselves degrade the sensors and equipment, often in short time periods. Michell Instruments’ DT722 RH and temperature transmitter provides a solution to this problem.

Telit HE910-based Mini-PCIe adapter card

06 December, 2012 | Glyn Ltd

Telit Wireless Solutions has introduced a Mini PCI Express card with an embedded M2M module designed for industrial applications.

  • All content Copyright © 2024 Westwick-Farrow Pty Ltd