Aaeon BOXER-8120AI AI@Edge machine vision system
30 May, 2019 | Interworld Electronics and Computer IndustriesAaeon has released the BOXER-8120AI AI@Edge controller — a high-performance, low-power-consumption machine vision system with support for four IP cameras.
Würth Elektronik WL-SFTW and WL-SFTD series RGB LEDs
29 May, 2019 | Wurth Electronics Australia PtyWürth Elektronik presents the WL-SFTW and WL-SFTD series of RGB LEDs, suitable for accent and decorative lighting, optical displays and industrial applications.
ICP DAS I-7565M-HS USB-to-CAN converter
28 May, 2019 | ICP Electronics AustraliaThe I-7565M-HS, from ICP DAS, is a high-speed USB-to-CAN converter with two CAN channels. Providing fast CAN bus communication performance, it supports the CAN2.0A/2.0B protocol and different baud rates ranging from 5 to 1000 Kbps.
Nordson DAGE Explorer one X-ray inspection system
27 May, 2019 | Nordson Australia Pty LtdThe Nordson DAGE Explorer one is a compact X-ray inspection system that has been designed specifically for the electronics industry. The product's high image quality allows features as small as 2 µm to be seen.
Spectrum Instrumentation M2p.6533-x4 and M2p.6568-x4 AWGs
24 May, 2019 | TRIO Test & MeasurementSpectrum Instrumentation has introduced two 16-bit arbitrary waveform generators (AWGs) with eight channels per card, offering opportunities for compact test systems.
STMicroelectronics STSPIN32F0B single-shunt BLDC motor controller
24 May, 2019 | STMicroelectronics Pty LtdSTMicroelectronics has expanded its STSPIN32 programmable motor controller family with the STSPIN32F0B system-in-package (SiP) for one-shunt current sensing — an all-in-one solution for the growing market of battery-operated power tools.
Technology Dynamics TTST-5000 Series DC-DC converters
23 May, 2019 | Metromatics Pty LtdTechnology Dynamics has introduced the TTST-5000 Series of high DC input voltage DC-DC converters. The series features an input range of 375–420 VDC, making it suitable for harsh industrial, railway, military, automation, specialty vehicle, scientific and telecom applications.
EXAIR 1/8 NPT small internal mix spray nozzles
22 May, 2019 | Compressed Air Australia Pty LtdEXAIR's 1/8 NPT small internal mix spray nozzles atomise fluids up to 106 L/h. The nozzles mix the liquid and air inside the cap and produce fine atomisation. They can be used on liquids with a viscosity up to 300 cP.
maxon motor industrial series IP65 hollow shaft right-angle gearmotor
21 May, 2019 | maxon motor Australia Pty LtdFeaturing high power density, maxon motor's 60 mm diameter, 400 W, 48 V brushless DC motor and right-angle helical bevel gear combination can deliver 25 Nm of torque.
STMicroelectronics STM32CubeIDE integrated development environment
21 May, 2019 | STMicroelectronics Pty LtdSTMicroelectronics is making the STM32 family of richly featured and energy-efficient microcontrollers more easily accessible for designers through the STM32CubeIDE, a free all-in-one STM32 development tool now available as part of the STM32Cube software ecosystem.
Vicor BCM4414 800 V bus converter module
20 May, 2019 | Vicor CorporationThe 800 V BCM4414, from Vicor, is a 1.6 kW, isolated, 1/16 fixed-ratio, bus converter module (BCM) that can operate from a 500 to 800 V input voltage, to deliver SELV output voltages with 97% peak efficiency.
STMicroelectronics Unico GUI for inertial measurement units
17 May, 2019 | STMicroelectronics Pty LtdSTMicroelectronics' Unico GUI simplifies configuring the finite state machine and machine learning core (FSM and MLC) logic of its latest inertial measurement units (IMUs).
Harwin S0911-46R and S0921-46R EMI/RFI shield clips
17 May, 2019 | Clarke & Severn Electronic SolutionsCovering a surface area of 2.3 x 1.2 and with 2 mm height, Harwin's S0911-46R shield can clip is designed to address the demands being set by the latest generation of high-density electronic systems.
Infineon OPTIGA TPM SLM 9670
17 May, 2019 | Infineon Technologies Australia Pty LtdInfineon Technologies has announced the OPTIGA TPM SLM 9670 — a Trusted Platform Module (TPM) specifically for industrial applications. The product protects the integrity and identity of industrial PCs, servers, industrial controllers or edge gateways.
Particle Argon, Boron and Xenon development kits
16 May, 2019 | element14Particle offers a range of next-generation cloud-connected development kits with mesh-enabled networking, making it possible to extend the user’s sensor mesh network and get their devices connected to cloud, over Wi-Fi or cellular networks, in minutes.