ICP DAS PM-3133i isolated, three-phase smart power meter

Monday, 17 May, 2021 | Supplied by: ICP Electronics Australia

ICP DAS PM-3133i isolated, three-phase smart power meter

ICP DAS has released the PM-3133i — a powerful, isolated, three-phase smart power meter that provides access to real-time electric usage for three-phase power measurement. With its high accuracy (<0.5%, PF=1), the series can be applied to both the low-voltage primary side and/or medium/high-voltage secondary side and enables users to obtain energy consumption readings from the monitored equipment in real time under operation.

The compact power meter is equipped with wired clip-on CT (various types, support input current up to 400 A). It operates over a wide input voltages range of 10–600 VAC, which allows worldwide compatibility. Built-in AC isolator protection means total isolation between the AC measurement side and the control side.

It is recommended that the CT and reference voltage of the meter be installed on the primary side of the AC filter with an EMI ferrite core to minimise the interference effects of the inverter.

Online: www.icp-australia.com.au
Phone: 02 9457 6011
Related Products

STMicroelectronics ISM330BX inertial measurement unit

The STMicroelectronics ISM330BX inertial measurement unit is designed for for energy-efficient...

Siemens Calibre 3DThermal software

The Siemens Calibre 3DThermal software is suitable for for thermal analysis, verification and...

Pendulum Instruments CNT-102 dual-channel frequency analyser

The CNT-102 dual-channel frequency analyser from Pendulum Instruments supports parallel and...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd