Rechargeable aluminium battery

Stanford University scientists have invented a high-performance aluminium battery that is fast charging, long lasting and inexpensive.

“We have developed a rechargeable aluminium battery that may replace existing storage devices, such as alkaline batteries, which are bad for the environment, and lithium-ion batteries, which occasionally burst into flames,” said Hongjie Dai, a professor of chemistry at Stanford. “Our new battery won’t catch fire, even if you drill through it.”

Dai and his colleagues describe their novel aluminium-ion battery in the journal Nature.

Aluminium has long been an attractive material for batteries, mainly because of its low cost, low flammability and high-charge storage capacity.

For decades, researchers have tried unsuccessfully to develop a commercially viable aluminium-ion battery. A key challenge has been finding materials capable of producing sufficient voltage after repeated cycles of charging and discharging.

An aluminium-ion battery consists of two electrodes: a negatively charged anode made of aluminium and a positively charged cathode.

“People have tried different kinds of materials for the cathode,” Dai said. “We accidentally discovered that a simple solution is to use graphite, which is basically carbon. In our study, we identified a few types of graphite material that give us very good performance.”

For the experimental battery, the Stanford team placed the aluminium anode and graphite cathode, along with an ionic liquid electrolyte, inside a flexible polymer-coated pouch.

“The electrolyte is basically a salt that’s liquid at room temperature, so it’s very safe,” said Stanford graduate student Ming Gong, co-lead author of the Nature study.

The Stanford team also reported “unprecedented charging times” - down to one minute with the aluminium prototype. The Stanford battery was able to withstand more than 7500 charge-discharge cycles without any loss of capacity. “This was the first time an ultrafast aluminium-ion battery was constructed with stability over thousands of cycles,” the authors wrote.

However, more improvements will be needed to match the voltage of lithium-ion batteries, said Dai.

“Our battery produces about half the voltage of a typical lithium battery,” he said.

“But improving the cathode material could eventually increase the voltage and energy density. Otherwise, our battery has everything else you’d dream that a battery should have: inexpensive electrodes, good safety, high-speed charging, flexibility and long cycle life. I see this as a new battery in its early days. It’s quite exciting.”

Applications

In addition to small electronic devices, aluminium batteries could be used to store renewable energy on the electrical grid, Dai said.

“The grid needs a battery with a long cycle life that can rapidly store and release energy,” he explained. “Our latest unpublished data suggest that an aluminium battery can be recharged tens of thousands of times. It’s hard to imagine building a huge lithium-ion battery for grid storage.”

Aluminium-ion technology also offers an environmentally friendly alternative to disposable alkaline batteries, Dai said.

“Millions of consumers use 1.5-volt AA and AAA batteries,” he said. “Our rechargeable aluminium battery generates about two volts of electricity. That’s higher than anyone has achieved with aluminium.”

Image credit: ©iStockphoto.com/snvv