Manufacturing technique holds promise for solar energy

A new semiconductor manufacturing method, pioneered at the University of Illinois in the US, is claimed to make the future of solar energy brighter.

Although silicon is the industry-standard semiconductor in most electronic devices, including the photovoltaic cells that solar panels use to convert sunlight into energy, it is hardly the most efficient material available.

For example, the semiconductor gallium arsenide and related compound semiconductors offer nearly twice the efficiency as silicon in solar devices, yet they are rarely used in utility-scale applications because of their high manufacturing cost.

Professors John Rogers and Xiuling Li explored lower-cost ways to manufacture thin films of gallium arsenide that also allowed versatility in the types of devices they could be incorporated into.

“If you can reduce substantially the cost of gallium arsenide and other compound semiconductors, then you could expand their range of applications,” said Rogers, the Lee J Flory Founder Chair in Engineering Innovation and a professor of materials science and engineering and of chemistry.

Typically, gallium arsenide is deposited in a single thin layer on a small wafer. Either the desired device is made directly on the wafer or the semiconductor-coated wafer is cut up into chips of the desired size. The Illinois group decided to deposit multiple layers of the material on a single wafer, creating a layered, ‘pancake’ stack of gallium arsenide thin films.

“If you grow 10 layers in one growth, you only have to load the wafer once,” said Li, a professor of electrical and computer engineering. “If you do this in 10 growths, loading and unloading with temperature ramp-up and ramp-down take a lot of time. If you consider what is required for each growth - the machine, the preparation, the time, the people - the overhead saving our approach offers is a significant cost reduction.”

Next the researchers individually peel off the layers and transfer them. To accomplish this, the stacks alternate layers of aluminium arsenide with the gallium arsenide. Bathing the stacks in a solution of acid and an oxidising agent dissolves the layers of aluminium arsenide, freeing the individual thin sheets of gallium arsenide.

A soft, stamp-like device picks up the layers, one at a time from the top down, for transfer to another substrate - glass, plastic or silicon, depending on the application. Then the wafer can be re-used for another growth.

“By doing this we can generate much more material more rapidly and more cost effectively,” Rogers said. “We’re creating bulk quantities of material as opposed to just the thin single-layer manner in which it is typically grown.”

Freeing the material from the wafer also opens the possibility of flexible, thin-film electronics made with gallium arsenide or other high-speed semiconductors. “To make devices that can conform but still retain high performance, that’s significant,” Li said.

The group has described its methods and demonstrated three types of devices using gallium arsenide chips manufactured in multilayer stacks: light sensors, high-speed transistors and solar cells. The authors also provided a detailed cost comparison.

Another advantage of the multilayer technique is the release from area constraints, especially important for solar cells. As the layers are removed from the stack, they can be laid out side by side on another substrate to produce a much larger surface area, whereas the typical single-layer process limits area to the size of the wafer.

“For photovoltaics, you want large area coverage to catch as much sunlight as possible. In an extreme case we might grow enough layers to have 10 times the area of the conventional route,” Rogers said.

“You really multiply the area coverage, and by a similar multiplier you reduce the cost, while at the same time eliminating the consumption of the wafer,” he said.

Among the paper’s co-authors are two scientists from Semprius, a North Carolina-based start-up company that is beginning to use this technique to manufacture solar cells. A shift from silicon-based panels to more efficient gallium arsenide models could make solar power a more cost-effective form of alternative energy.

Next, the group plans to explore more potential device applications and other semiconductor materials that could adapt to multilayer growth.

University of Illinois

www.uillinois.edu