STMicroelectronics EVL400W-EUPL7 evaluation board

Thursday, 06 August, 2020 | Supplied by: STMicroelectronics Pty Ltd

STMicroelectronics EVL400W-EUPL7 evaluation board

STMicroelectronics’ EVL400W-EUPL7 evaluation board delivers a ready-to-use 400 W power-supply solution that meets today’s eco-design norms. The board leverages ST’s L4984D current-mode PFC controller and L6699 resonant half-bridge controller to maximise energy efficiency in multiple operating modes.

Full-load efficiency is over 93% at 230 VAC and over 91% at 110 VAC, with no-load mains consumption of less than 0.150 W, meeting ENERGY STAR Version 6.1 requirements for computers, European EuP Lot 6 Tier 2 requirements for household and office equipment, and CoC (Code of Conduct) Version 5 Tier 2 for external power supplies. The product has also achieved CLEAResult Plug Load Solutions 80 PLUS certification, rated Platinum at 115 VAC and Gold at 230 VAC.

High efficiency at light loads leverages support for burst mode, featured in the L4984D and L6699, as well as the L6699’s self-adaptive dead-time that allows for reduced primary current. The L4984D and L6699 each have low quiescent current and a disable input that allows remote on/off control and can be used for power sequencing or brownout protection. The two devices can also interact to switch off the pre-regulator when operating in burst mode.

With ST’s SRK2001 synchronous-rectification controller also on board, the product achieves high average and typical efficiency across a wide load range. Saving energy with synchronous rectification also allows a small heatsink at the secondary side. Built-in active high-voltage start-up circuitry, designed with a depletion MOSFET, reduces the residual consumption in normal operation to a negligible level and ensures a fast start-up time.

Having a 12 V output and wide AC input-voltage range from 90 to 264 V (45–65 Hz), the device provides a medium-power reference design ready to meet energy-saving targets for applications such as ATX supplies, small servers and workstations, medical equipment, signage and LED panels. With its low no-load consumption, which eliminates the need for an auxiliary switched-mode power supply (SMPS), the design should also help save bill-of-materials (BoM) costs.

For more information: http://www.st.com/evl400w-eupl7-pr.

Online: www.st.com
Phone: 02 9158 7200
Related Products

iBase AGS104T IoT gateway edge computing system

The iBase AGS104T IoT gateway edge computing system supports up to 16 GB of DDR5-4800 memory,...

Vecow RCX-3750 PEG GPU-accelerated system

The VECOW RCX-3750 PEG GPU-accelerated system is designed to handle demanding AI, edge computing...

STMicroelectronics PWD5T60 three-phase driver

The STMicroelectronics PWD5T60 three-phase driver features a ready-to-use evaluation board that...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd