STMicroelectronics ASM330LHBG1 3-axis inertial module

STMicroelectronics has launched the ASM330LHBG1 automotive 3-axis accelerometer and 3-axis gyroscope module with a safety-software library that provides a solution for functional-safety applications.

The device is AEC-Q100 Grade-1 qualified for an ambient operating temperature range -40 to 125°C, allowing use such as next to engine compartments and in areas exposed to sunlight. The modules are suitable for systems such as vehicle navigation, body electronics, in driver support and highly automated driving systems. Typical uses include support for precise positioning in navigation systems, digitally stabilising cameras, lidars and radars, and in active suspension, door modules, vehicle-to-everything (V2X) applications, adaptive lighting and motion-activated functions.

Equipped with ST’s machine-learning core (MLC) and programmable finite state machine (FSM), the module can run artificial intelligence (AI) algorithms in the sensor to provide smart functionality at very low power. This IMU is pin-to-pin compatible and shares the same configuration of registers as ST’s automotive IMUs with a lower operating temperature range, thereby facilitating an easier upgrade.

The modules also contain embedded temperature compensation, which provides stability over wide-ranging operating conditions, with a six-channel synchronised output to enhance the accuracy of dead-reckoning algorithms. There are also I²C, MIPI I3C and SPI serial interfaces, smart programmable interrupts and a 3 KB FIFO that eases managing sensor data to minimise load on the host processor.

The independently tested and certified software adheres to ISO26262 and enables safety-compliant redundancy with two ASM330LHBG1 modules. Fulfilling safety element out of context (SEooC), this combination based on general-purpose hardware supports system certification up to automotive safety integrity level B (ASIL B). This library provides software for configuring the sensing module, checking for correct operation before starting to acquire data and handling the acquisition of the data coming from the sensing module. Each of these steps is associated with an error code that provides confirmation if a fault is detected. This solution comprising two identical sensors provides redundancy, checking the data coming from two different sensing sources are consistent.

The ASM330LHBG1 is in production now and available in a 14-lead, 2.5 x 3 mm VFLGA plastic land grid array package.