The second generation I/O board from ETM Pacific is for use with 2G/GSM and 3G/NextG Intelligent terminals. It allows the connection of typical commercial/industrial sensors and control components, such as 0-10 V or 4-20 mA sensors and switching DC loads to a maximum of 2 A at 30 VDC, to ETM9570-1 or ETM9910-1 intelligent terminals to allow for SMS alarm and/or control applications or automated data logging.
The board builds on the flexibility and success of the existing unit by adding an optional 24 V switched sensor power supply, while itself being powered at any voltage in the range 6-35 VDC.
Two versions of the board are available, one without switched sensor supply and one with.
Phone: 02 9956 7377
Quectel HCM511S MCU Bluetooth module
The Quectel HCM511S MCU Bluetooth module features enhanced receiver sensitivity and a maximum...
ADLINK cExpress-ASL COM express module
The ADLINK cExpress-ASL COM express module is integrated with Intel UHD graphics with up to 32...
Sensirion SFC6000D mass flow controller
The Sensirion SFC6000D mass flow controller is designed to be small and light, thereby allowing...
