RECOM S RELI-DA01/R signal converter for DALI-controlled LED lighting
Recom’s signal converter RELI-DA01/R is an interface between dimmable LED drivers and DALI devices such as switches, dimmers and sensors.
The product communicates with the DALI Bus and receives commands which convert into PWM or 1-10 V signals. This signal will interact with any existing dimmable LED driver, transforming the LED driver into a DALI-compatible LED driver with minimal changes to the system or recertifications.
The output can control up to six LED drivers, allowing the lighting in a whole room or office to be dimmed with just one DALI address. A built-in relay can be used to switch off the LED drivers under software control to give zero no-load consumption.
Due to a wide input voltage ranging from 90 to 264 VAC, the device can be used worldwide without further modifications. Measuring 150 x 40 x 30 mm, it is compact and weighs only 100 g. It is compliant with the DALI IEC62386 standard.
Phone: 0011 65 6276 8795
Quectel HCM511S MCU Bluetooth module
The Quectel HCM511S MCU Bluetooth module features enhanced receiver sensitivity and a maximum...
ADLINK cExpress-ASL COM express module
The ADLINK cExpress-ASL COM express module is integrated with Intel UHD graphics with up to 32...
Sensirion SFC6000D mass flow controller
The Sensirion SFC6000D mass flow controller is designed to be small and light, thereby allowing...
Learn More
I am interested in RECOM S RELI-DA01/R signal converter for DALI-controlled LED lighting.
Complete the form and a supplier representative will be in touch.
