Neoden IN6 reflow oven

Friday, 13 September, 2019 | Supplied by: Neoden USA


The Neoden IN6 reflow oven was carefully designed with proper heating elements and next-generation sensors that ensure consistent and even heating throughout the entire length of the process chamber. There is also a built-in filtration system for the solder smoke, eliminating the issue of air contamination.

The product requires no external ventilation system, as all safety features are included in the unit. This gives the device flexibility in where it can be placed and used in a manufacturing setting, since there is no need to worry about adequate ventilation.

The product has a responsive touch-screen control unit capable of meticulous programming options. Its manufacturing profile is customisable and the machine can have up to 16 different profiles saved at any given time, which cuts down on the time required to change over to a different profile. Errors that can be made during reprogramming are said to be effectively eliminated once the profiles have been set properly.

The six heating zones located on the top and bottom of the reflow oven ensure stable and uniform heating for all the PCB components. The temperature can be easily viewed through the display located on the side of the oven and can be stabilised within +0.2°C.

The full hot-air convection system offers a complete soldering performance, no matter the project. The conveyor speed ranges from 15 to 60 cm/min.

Online: neodenusa.com
Phone: 0011 1 (973) 728-7060
Related Products

Axiomtek MMB541 Micro ATX motherboard

The Axiomtek MMB541 Micro ATX motherboard is suitable for AI workstations and factory automation...

Quectel QLM29H Series GNSS receiver

The Quectel QLM29H Series GNSS receiver combines the LC29H GNSS module and an integrated GNSS...

TTM Technologies XMWT80L1G RF termination

The TTM Technologies XMWT80L1G RF termination is designed to replace larger, bulkier caseless and...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd