OKW Gehäusesysteme SOLID-BOX enclosure range

Click2Contact

The SOLID-BOX enclosure range by OKW Gehäusesysteme is designed to meet a range of requirements for modern electronics packaging in industrial environments or in protected outdoor areas. Flush-fitting, snap-on trims conceal the screw attachments and, together with the polished enclosure surface, provide a streamlined appearance.

The two-part robust industrial enclosure is available from stock in the two standard colours anthracite grey (RAL 7016) and light grey (RAL 7035). Three different versions with 135 x 115 x 50 mm, 180 x 145 x 60 mm as well as 225 x 175 x 70 mm (L x W x H) allow the assembly of visually uniform enclosure series. A recessed panel for integrating membrane keyboards is located on the top surface.

The enclosure range is made of flame-retardant V0 material (PC+ABS-FR) with an improved heat distortion temperature (Vicat/B 120 = 110°C). To protect the electronics from moisture, dust and dirt, the interior is sealed to IP66/IP67. The enclosure design also allows increased resistance to impact and shock stress according to IK08.

The upper and lower parts are assembled using rust-proof and captured Torx screws outside the sealed interior. The enclosure screw connections, as well as the channels for direct wall mounting, are then innovatively concealed by the supplied design trims (surface slightly structured). Each enclosure bottom part has two recessed surfaces for installing and protecting interfaces and cable connections. To match the appearance, black cable glands and bushings in various designs (M12-M20, Quick-Fix assembly, easy-to-pierce membrane, etc) and a cable gland with integrated pressure compensation are available as accessories.

As a wall-mounted and desktop enclosure, the SOLID-BOX is suitable for robust electrical and electronic applications. Typical applications include heating and air conditioning, plant engineering and construction, diverse areas of the IIoT and the smart factory as well as safety engineering, etc. For desktop positioning, a set of suitable enclosure feet is available. To prevent the top part from falling during initial assembly or in the event of subsequent servicing, the enclosure range is supplemented by a cover retention device. If users need to open the enclosure several times, they can also use the internal hinge set (both are included in the range of accessories). Fastening pillars inside the enclosure allow the installation of PCBs, DIN rails and mounting plates. The larger versions also include pre-moulded mounts for VESA standard holders (version 145 for VESA 75 x 75 mm, version 175 for VESA 100 x 100 mm). Like all the services listed below, the holes required for this can be drilled in the in-house service centre: EMC aluminium coating, printing, mechanical processing, laser marking, decor foils/labels/stickers and assembly work.

For more information, click here.